Build My Camper: Fleet Shell Model

Looking for a safe way to get in & out of your camper? This is a great option for that. The 2-step hitch receiver step will fit into most any hitch receiver. Lightweight aluminum design.

Plastic Rubbermaid Entry Step. Small, lightweight, and has many different uses besides getting in & out of your camper.

All new Four Wheel Campers require that our factory service techs or your local dealer installs our camper tie downs and a simple wiring harness in your truck bed before loading the camper and sending you out on your adventures. The camper tie downs (custom made Tacoma tie down bed bars, fabricated by Four Wheel Campers) for Toyota Tacoma Trucks from 2005 - 2022, with the Long 6.0' Bed, will keep the camper on your truck during your travels. The wiring harness will allow your truck alternator to recharge the deep cycle battery(s) inside your camper while you are driving to and from your destinations.

All new Four Wheel Campers require that our factory service techs or your local dealer installs our camper tie downs and a simple wiring harness in your truck bed before loading the camper and sending you out on your adventures. The camper tie downs (forged, zinc coated, eye bolts installed in the truck bed) will keep the camper on your truck during your travels. The wiring harness will allow your truck alternator to recharge the deep cycle battery(s) inside your camper while you are driving to and from your destinations.

A very small number of the mid-sized trucks with the crew cab and really short 5.0' bed, might require the camper to be "bolted down" on to the truck bed. The camper can still be removed from the truck, but the camper would unbolt, instead of removing turn buckles. (Note: The bolt down installation is NOT available for the 2005 and Newer Toyota Tacoma trucks with the composite (plastic) truck bed.) Customers leaving their camper on full-time sometimes choose the "bolt down" installation as well.

The Fiamma 8' Foot Side Awning is an excellent choice for simplicity, durability, and ease of use. The awning provide coverage from the outside elements down the passenger side of your camper.

Looking for side and rear coverage on your camper from the outside elements? The Eezi-Awn Bat 270 Wraparound Awning will provide you with 270 degrees of awning coverage around the passenger side & rear of your camper.

If you plan to put your camper on your truck, and also take it off your truck by yourself, you will need to order the Mechanical Camper Jacks option. These jacks can be left on the camper all the time, or removed for your travels. If you don't plan on taking your camper off during your camping trips, we usually recommend leaving the jacks at home. Without camper jacks attached to your camper, your camper will be lighter weight and you'll have better visibility with your side mirrors on the truck.

Axe & Shovel Kit Combo. This option attaches to the rear wall of the camper (to the jack bracket on the corner of the camper).

If you order a roof rack and want better access to load & unload items off of the camper roof, you might want to consider adding the Rear Wall Steps to your camper order. Besides giving you better access to the roof, the rear wall steps are also useful for hanging towels & swimsuits on, locking bikes to, and many other things.

Prefer to carry your surfboard or SUP on the side of your camper, instead of on the top of your camper roof? Then you can consider this board rack. Easy installation for both new & older Four Wheel Campers (no drill application - bolts onto the camper jack brackets).

LED Rear Flood Lights can be a nice addition to your camper if for are looking for the most possible light outside. These lights are typically used for short periods of time as bright utility lights. Examples on how customers will use their rear flood lights: unloading your horses at night, putting your boat in the water in the dark, scaring away unwanted critters in your campground at night, and many more uses not listed.

Looking for a simple, basic, inexpensive roof rack? The Aluminum Roof Rack we offer might fit your needs. It included the rear cargo rack and also a single cross bar near the front of the camper roof.

This option is for the complete Yakima Roof Rack System. It would include Yakima tracks installed on the camper roof, landing pads, towers, 2 cross bars , and locks.

Roof Rack "Tracks Only" installed on the camper roof. This option will allow you to easily add the complete Roof Rack System at a later date.

2nd Powered Roof Vent Fan, Installed Forward (in the cabover portion of the camper roof / over bed area).

For customers that might want to install their own aftermarket solar panels, we can install a "Charge Controller Only" inside your new camper if you like. From there you can source and install your own solar panels at a later date. All campers are pre-wired for solar, but not all campers come with the controller installed, and the campers don't come with in-line fuses or a completed/hooked up solar wiring. If you by a solar system from us we will install everything and make the system turn-key. But if you decide to install your own solar panels at a later date there is still some work you will need to do to complete it all.

Overland Solar 130 Watt Portable Solar Panel without the charge controller.

Solar is becoming more popular each year. For customers ordering the compressor style refrigerators, or for customers that want to insure their camper battery(s) stay as charged up as possible will usually order the complete solar system with their new camper. This package includes the Overland Solar 160 watt roof mounted solar panel, the MPPT charge controller, wiring, in-line fuse, and the system will be ready to go when you pick up your camper. 

Want more reserve power for your camper? Adding a second 12 Volt Battery (dual battery set up) will give you double the battery power, compared to having just 1 battery in your camper.

All of the new Four Wheel Pop-up Campers come standard with 1 (one) 12 Volt deep cycle camper battery and the battery separator. Customer can choose to upgrade to dual camper batteries if these choose to. The battery separator will automatically keep the truck starting battery, and the camper battery, separate from each other while you are camping. This ensures your truck will always start, even if you have some how accidentally drained the camper battery(s).

Adding the complete Furnace System in our "Shell Model Camper" is one of the most popular options we offer in the shell models. For this option we would install the furnace cabinet (rear/driver's side corner), a forced air furnace, thermostat, deep cycle camper battery in the cabinet, 2 propane tanks, 12 Volt Outlet & USB outlets, and a carbon monoxide/propane safety sensor.

All of the new Four Wheel Campers come standard with the traditional wood grain interior look (maple wood color). But you can upgrade to the Silver Spur Interior (Grey Interior) if you like. This option would be for the upgrade to the Silver Spur Interior on the Shell Model Camper. You can still pick whatever fabric color you want for the seat cushions and/or mattress cover.

All of the new Four Wheel Campers come standard with the traditional wood grain interior look (maple wood color). This has been a popular interior choice for our customers over the years. It has a bright & warm feeling to it. Lightweight, durable, and no additional charge (it is built into the base price on the shell models). There are many different interior fabric colors for you to choose from.

Looking for seating in your Shell Model Camper? The Roll Over Couch option is a very popular. It can be used for seating, it can be converted into a lower bed, and it also provides a good amount of storage space underneath and behind it. Side by side seating on the couch is quite ample.

Looking for seating in your Shell Model Camper? The Side Dinette Seating w/ Swivel Table is also very popular. Face to face seating down the passenger side of the camper, also with the large picture window presents an open feeling with the flexibility. The swivel table offers a work & dining surface which converts to added sleeping space. Storage under the seats, as well as a small corner cabinet help to provide added storage capacity. The center passageway allows freedom of movement without interfering with the fellow traveler seated or sleeping on the dinette.

Interested in having the most windows possible, and the most ventilation for your "Shell Model" camper? If so, you can add the Small Driver's Side Window if you would like it.

If you order the Furnace System in your somewhat empty "Shell Model Camper", you also have the option to add a 2 burner propane stove on top of the furnace cabinet. This option is for the Flush Mount propane stove installed on top of your shell model furnace cabinet.

If you order the Furnace System in your somewhat empty "Shell Model Camper", you also have the option to add a 2 burner propane stove on top of the furnace cabinet. This option is for the Standard 2 burner propane stove installed on top of your shell model furnace cabinet.

Back-up cameras are available for Factory Direct camper orders, and many of our individual dealers offer these as an option as well. These aftermarket backup cameras are available for most trucks, but not all. Your truck needs to have a factory installed camera already for our camera to work properly.

The "Carpet Kit" option is a custom made piece of carpet to lay over the standard linoleum floor. All campers always come with the linoleum flooring, but if you want something nicer and more comfortable, a carpet kit is a nice touch. Some customer feel that it helps to keep the camper cleaner inside, as the carpet allows dirt to settle and can be swept out when you get home from your camping trip. The carpet is removable for easy cleaning.

If you like more comfort or like to camping in cooler weather conditions, the Thermal Pack is a great option for you. The camper will be warmer inside when you have the Thermal Pack option installed, the camper will stay a bit darker in the morning when the sun is coming up, and it is also a good sound barrier in case you have noisy neighbors at the campsite next to you. The Thermal Pack can be left in the camper year round, removed when you want, and the camper roof will still go up and down when the thermal pack is installed.

Back-up cameras are available for Factory Direct camper orders, and many of our individual dealers offer these as an option as well. These aftermarket backup cameras are available for most trucks, but not all. Your truck needs to have a factory installed camera already for our camera to work properly. This more expensive (complex) back-up camper is for the newer trucks with the 360 degree view cameras.

Not going to order the "Thermal Pack" with your new camper? Then maybe consider adding just the Thermal Pack "Prep" option. Our factory will install the lower Velcro strip along the interior walls so that if you want to add the Thermal Pack down the road, installation will be quick & easy when it arrives.

CleanWaste Portable Toilet.

Thetford 260B Porta Potti.

Dual 6 volt batteries will hold approx. 25% more power, compared to having Dual 12 volt batteries.