Build My Camper

The short bed models of Project M campers/toppers have a base price of $8,995.00. There is a small up-charge if you are ordering a new Project M camper/topper for a full sized, long 8.0' foot bed truck. The additional $500.00 up-charge for a long bed camper/topper helps to cover the labor and extra materials required to build the longer camper.

Plastic Rubbermaid Entry Step. Small, lightweight, and has many different uses besides getting in & out of your camper.

If you want to be able to load & unload your Project M camper/topper by yourself, you should consider ordering the Mechanical Camper Jacks. The jacks attach to the "jack brackets" on the corners of the camper, and can be raised & lowered by hand or by the used of a cordless drill with the special drill bit adapter.

Board Rack (mounted to the side of camper). Attaches to the camper jack brackets. For carrying a single surfboard or one SUP on the side of your camper shell/topper.

Exterior Gear Track on Passenger Side -- short bed models (5.0' - 6.5' models)

Exterior Gear Track on Passenger Side -- long 8.0' bed camper/topper model

Exterior Gear Track on Driver's Side -- short bed models (5.0' - 6.5' models)

Exterior Gear Track on Driver's Side -- long 8.0' bed camper/topper model

Need to carry extra fuel with you? We offer a Single Rotopax option w/ Mounting Hardware & Lock that can be mounted to the side of your camper/topper. Most customers are mounting these to the Exterior Gear Tracks, that are a separate option for the sides of your Project M Topper.

Need to carry extra fuel with you? We offer a Dual Rotopax option w/ Mounting Hardware & Lock that can be mounted to the side of your Project M Topper. Most customers are mounting these to the Exterior Gear Tracks, that are a separate option for the sides of your topper.

Maxtrax is the lightweight, easy to use, vehicle recovery & extraction device that is easily carried by almost anything with four-wheels ensuring an easy way out if your truck becomes stuck. This would include 1 pair of Maxtrax, mounted to the Project M Topper. (NOTE: Exterior Gear Track must also be purchased so we have something to mount the Maxtrax to).

Basic Rear Flood Lights (LED). Customer must also order the "Pre-Wire for Power" option.  Note: If you camper/topped does not have a 12V power pack option installed from our factory, it will be up to the customer to finish hooking up these Rear Flood Lights to some sort of 12v power supply once they get the camper.

Roof Rack "Tracks Only" installed on the camper roof. This option will allow you to easily add the complete Roof Rack System at a later date.

Looking for a simple, basic, inexpensive roof rack? The Aluminum Roof Rack we offer might fit your needs. It included the rear cargo rack and also a single cross bar near the front of the camper/topper roof.

This option is for the complete Yakima Roof Rack System. It would include Yakima tracks installed on the camper/topper roof, landing pads, towers, 2 cross bars , and locks.

If your camper/topper already has Yakima roof racks mounted on it, we have an option for adding Yakima attachments for carrying your snow skis. The Snow Ski attachment is designed to help you carry your skis on top of your camper/topper, instead of inside the camper.

If your camper / topper already has Yakima roof racks on it, we have an option for adding Yakima attachments for carrying a single kayak. Designed to help you easily get most any type of kayak up on your roof, the HandRoll's rubber rollers provide load assist with grip, stability, and protection. The bases pivot to automatically fit the shape of your boat, then lock tight to cradle it while traveling. The universal mount fits most roof racks.

Basic Roof Vent (without fan), Installed in Middle of Roof (over the interior of the truck bed).

Basic Roof Vent (without fan), Installed Forward (in the cabover portion of the camper roof / over bed area).

Powered Roof Vent Fan, Installed in Middle of Roof (over the interior of the truck bed).

Powered Roof Vent Fan, Installed Forward (in the cabover portion of the camper roof / over bed area).

Includes (4) interior LED ceiling lights installed, pre-wiring for roof vent fans, pre-wiring for rear flood lights, and pre-wiring on the camper/topper roof for solar.

AGM Power Solution for the Project M Toppers

• Single AGM 12v Deep Cycle Battery (75 ah)
• 750 Watt Inverter (Modified Sine Wave) w/ 110v Outlets
• Four (4) -- USB Outlets
• One (1) -- 12 Volt Outlet
• Two (2) -- 30amp Powerpole Outlets
• 8 amp Battery Charger (recharges battery from 110 volt AC shore power)

AGM Power Solution w/ Truck Charging for the Project M Toppers

• Single AGM 12v Deep Cycle Battery (75 ah)
• 750 Watt Inverter (Modified Sine Wave) w/ 110v Outlets
• Four (4) -- USB Outlets
• One (1) -- 12 Volt Outlet
• Two (2) -- 30amp Powerpole Outlets
• 8 amp Battery Charger (recharges battery from 110 volt AC shore power)
• AGM Power Solution will hooked up to your truck battery with fuses, wiring, plug, and battery separator installed. This allows the AGM camper battery to get recharged when your truck engine is running.

AGM Power Solution w/ 160 Watt Solar Panel for the Project M Toppers

• Single AGM 12v Deep Cycle Battery (75 ah)
• 750 Watt Inverter (Modified Sine Wave) w/ 110v Outlets
• Four (4) -- USB Outlets
• One (1) -- 12 Volt Outlet
• Two (2) -- 30amp Powerpole Outlets
• 160 Watt Overland Solar Panel on Roof
• Overland MPPT Solar Charge Controller (15 amp)
• 8 amp Battery Charger (recharges battery from 110 volt AC shore power)

AGM Power Solution w/ 160 Watt Solar Panel & Truck Charging for the Project M Toppers

• Single AGM 12v Deep Cycle Battery (75 ah)
• 750 Watt Inverter (Modified Sine Wave) w/ 110v Outlets
• Four (4) -- USB Outlets
• One (1) -- 12 Volt Outlet
• Two (2) -- 30amp Powerpole Outlets
• 160 Watt Overland Solar Panel on Roof
• Overland MPPT Solar Charge Controller (15 amp)
• 8 amp Battery Charger (recharges battery from 110 volt AC shore power)
• AGM Power Solution will hooked up to your truck battery with fuses, wiring, plug, and battery separator installed. This allows the AGM camper battery to get recharged when your truck engine is running.

Axe & Shovel Kit Combo. This option attaches to the rear wall of the camper (to the jack bracket on the corner of the camper).

If you like more comfort or like to camping in cooler weather conditions, the Thermal Pack is a great option for you. The camper will be warmer inside when you have the Thermal Pack option installed, the camper will stay a bit darker in the morning when the sun is coming up, and it is also a good sound barrier in case you have noisy neighbors at the campsite next to you. The Thermal Pack can be left in the camper year round, removed when you want, and the camper roof will still go up and down when the thermal pack is installed.

Optional Small Passenger Side Window 19" x 26".

Large Window on Passenger Side (19" x 56")

This is the option for a small Access Door on the Passenger Side of your camper/topper. This small access door measures approx. 19" x 26".

This is the option for a large Access Door on the Passenger Side of your camper/topper. This larger access door measures approx. 19" x 56". Note: There are some limitations when installing the large access door option on the small, short bed Project M campers (it is a space issue). Please ask your sales rep. for further details.

To reduce weight & costs, and provide more flexibility for the customers, the new Project M campers do not come standard with a cabover bed mattress. You can easy add one on your own, or choose this option from our factory if you want to purchase the mattress from us. (MATTRESS COVERED WITH BLACK VINYL)

Interior L Track --- (5' or 6' Model w/ Tracks on Both Sides)

With 3 Ratchet Straps.

Interior L Track --- (8' Model w/ Tracks on Both Sides)

With 3 Ratchet Straps.

To reduce weight & costs, and provide more flexibility for the customers, the new Project M campers do not come standard with a cabover bed mattress. You can easy add one on your own, or choose this option from our factory if you want to purchase the mattress from us. (MATTRESS COVERED WITH A SOFT, BLACK FABRIC)

CleanWaste Portable Toilet.

Thetford 260B Porta Potti.