Skip Navigation
Categories Build & Price
Build & Price
Categories Build & Price

Toyota Tacoma Truck Camper

The Tacoma Was Built for This Truck Camper

Four Wheel Campers makes four pop-up campers that fit a Tacoma. From a 350-pound topper to a fully built-out slide-in with a stove, sink, furnace, and queen bed. All of them keep your truck’s low profile, off-road clearance, and ability to go where an RV can’t.

The Tacoma is one of the most common trucks we build for, and it’s also the one where getting the details right matters most. Bed length determines which models fit. Payload determines which ones you should actually put on your truck. This page walks through both.

Metallic Charcoal Swift slide-in camper on a grey 3rd Gen Toyota Tacoma
  • Since 1972 The original pop-up truck camper company
  • From 352 lbs Project M is the lightest Tacoma-compatible build
  • Low Profile Clears trails and garages a hard-side can't
  • Built by Hand Assembled in Woodland, California
  • Dealer Install Nationwide dealer install & service network

Tacoma Truck Camper Compatibility

Four models are built for mid-size trucks. Which one is right depends on your bed length, your payload, and how much camper you actually want.

Four Wheel Camper models that fit a Toyota Tacoma
Model Fits Base dry weight Starting price Best for
Project M on a Tacoma
Project M Topper (bolts to bed rails)
5' and 6' beds ~352–420 lbs From $12,900 Lightest build. Keeps the truck bed usable. A blank canvas you finish yourself.
Swift on a Tacoma
Swift Slide-in pop-up
5' beds ~900–1,050 lbs From $20,275 Short-bed Tacomas that want a full built-out interior with no compromise
slide in campers
Fleet Slide-in pop-up
6' beds ~810 lbs (shell) to
~1,045 lbs (built)
From $20,800 6' bed Tacomas. Three floorplans, the most interior space that fits a Tacoma.
CampOut on a Tacoma
CampOut Modular slide-in
Multiple bed lengths ~950–1,050 lbs From $24,450 Buyers who want to configure modular components rather than a fixed layout

Where to Buy Your Toyota Truck Camper

Find a dealer near you

See a Fleet, Swift, Project M, or CampOut in person, bring your Tacoma for a fit check, and get your camper installed by a team that does it every week.

Find a Dealer Near You

Know Your Truck Payload

Your payload capacity is your responsibility to verify.

Every number on this page is a general reference for planning only. Payload varies significantly by model year, cab configuration, drivetrain, trim, and factory options: two Tacomas parked next to each other can differ by hundreds of pounds. Only the sticker on your truck tells you your truck’s rating.

Before you order any camper, you are responsible for:

  • Locating the yellow and white payload sticker inside your driver’s side door jamb and reading your truck’s specific rating
  • Adding up the fully-built weight of the camper you’re configuring — not the base dry weight — plus water, propane, batteries, gear, accessories, aftermarket parts, passengers, and pets
  • Confirming you’ll stay within your truck’s GVWR and rear GAWR
  • Consulting Toyota, your owner’s manual, or a qualified professional if you’re unsure

What Tacomas typically run

Depending on year, cab, drivetrain, and trim, Tacoma payload generally falls somewhere in the range of 1,050 to 1,685 lbs. That’s a wide spread — the difference between a base configuration and a crew cab off-road trim can be several hundred pounds. Many 4WD Double Cab short beds land near the lower end of that range.

Use this range for orientation only. Your sticker is the only number that counts.

Real Tacoma Truck Camper Builds

How to Customize Your Truck Camper

  1. Pick your truck

    Choose your truck and bed length.

  2. Choose a model & floorplan

    Pick the camper and layout that fit how you travel.

  3. Add options

    Add the options you want, keeping an eye on total weight.

  4. Talk to a dealer

    Take your build to a dealer for a quote and installation.

Popular Tacoma Truck Camper Modifications and Add Ons

Quilted 3-Layer Thermal Pack

Quilted 3-Layer Thermal Pack

A thick quilted liner that insulates the pop-up fabric, with custom-cut coverings for the lower windows. Warmer in cold weather, darker in the morning, and noticeably quieter with neighbors nearby. It stays installed year-round and the roof still raises and lowers normally. Available upper-only or with the lower window coverings.

~6–8 lbs
Power Roof Vent AC-Cool Breeze for Four Wheel Camper

Powered roof vent fan (MaxxAir)

The highest-value-per-pound option we sell. Pulls hot air out on summer nights and cuts condensation in cold ones. Most builds include one; a second fan over the cabover bed is a common add for anyone camping in heat.

~8–9 lbs each
Roof-mounted solar

Roof-mounted solar

Options run from roughly 160W up to 500W with an MPPT controller. Note that roof space is finite and shared: on short-bed campers you’re often choosing between a second fan and additional solar. Larger arrays fit long-bed and flatbed models.

~10–28 lbs depending on wattage
Additional windows

Additional windows

A passenger-side window, a rear hatch window, or a sliding side window with safety exit. More light and cross-ventilation, and a real difference in how open a small camper feels.

pop up camper

Yakima roof tracks or roof rack

For boards, bikes, boxes, and skis. Remember this weight sits high and on the roof you’re lifting by hand.

Bamboo Countertop

Bamboo Countertop

NEW. Upgrade your interior with custom bamboo countertops.

Truma Water Heater w/ Outside Shower

Truma Water Heater w/ Outside Shower

Makes off-roading and off-grid lifestyles easier with a built-in water heater and outdoor shower setup.

Exterior gear tracks and interior L-track

Exterior gear tracks and interior L-track

Modular mounting for gear inside and out.

Add-on spec sheet PDF

Download spec sheet

What A Toyota Truck Camper Costs

Starting prices are the entry point, not the number most people pay. Here’s a more honest picture.

Typical Tacoma camper costs by model
Cost Project M Swift / Fleet CampOut
Starting price From $12,900 From $20,275 From $24,450

Installation & Timeline

  1. Order

    Configure with a dealer or through Build & Price, place your deposit, and get a build slot.

  2. Build

    Currently around 3–5 months, varying by dealer and season. Confirm the current estimate with your dealer before planning around a trip.

  3. Install

    Your dealer installs the camper on your Tacoma, including the tie-down system. Installs typically take around 4 hours.

  4. Walkthrough

    Before you leave, you’ll be shown the lift system, heater, water system, electrical, and maintenance schedule. Ask every question you have — this is the time.

Tacoma Four Wheel Camper: Testimonials

What impressed us most, however, was the efficient use of space. Every inch is thoughtfully used.
Martien Brand Swift · 2011 Dodge Ram 3500 diesel · Alberta CAN

Tacoma Truck Camper FAQ

Will a Four Wheel Camper fit my Tacoma?

Yes! We build four models for mid-size trucks. If you have a 5-foot bed, look at the Swift, Project M, or CampOut. If you have a 6-foot bed, look at the Fleet, Project M, or CampOut. The Hawk and Grandby are built for larger trucks and won’t work on a Tacoma.

What’s the lightest camper for a Tacoma?

The Project M, starting around 352 lbs for mid-size configurations. It bolts to your bed rails, keeps the truck bed usable, and leaves the most payload headroom of anything we build.

How do I find my Tacoma’s payload capacity?

The yellow and white sticker inside your driver’s side door jamb. It’s specific to your truck as it left the factory. Verifying it is your responsibility as the owner.

Do I need suspension upgrades for a slide-in camper?

For a slide-in on a Tacoma, almost always. The stock rear leaf pack isn’t designed for continuous heavy loads. Most owners run upgraded springs, upgraded rear shocks, and often airbags.

How long is the wait?

Roughly 3–5 months from order, varying by dealer and season. Call your dealer for a current estimate.

Can I use it in cold weather?

Yes. Our campers are insulated and available with a furnace. Many owners use them well into shoulder season and winter. A furnace and appropriate ventilation make a significant difference.

Will it affect my gas mileage?

Yes. Pop-up campers have a much lower profile than hard-side campers, so the penalty is smaller than most alternatives, but you should expect a noticeable drop. Actual impact depends on your build weight, speed, and terrain.

Can I still go off-road?

That’s what the pop-up design is all about! Roof down, the camper keeps your Tacoma’s profile low and its center of gravity manageable, which is why so many of these end up in Baja, on the Mojave Road, and on the Dalton Highway.

Can I take the camper off the truck?

Slide-in models can be removed. Many owners use jacks to unload the camper at camp or store it in the off-season. The Project M bolts to the bed rails and is removable with more effort.

Do you offer financing?

Yes, we do! Talk to your sales representative about financing when discussing your Four Wheel Camper build.

Build the Tacoma you actually want to travel in

Looking to connect with a sales representative to talk you through your Tacoma truck camper build? Contact us here, and someone will be in touch with you shortly!

Camper Model

What kind of truck are you looking to build?

Camper Model

Thank you for your interest in our campers!

 

CURRENT LEAD TIMES:

Lead times are typically 2-3 months depending on location. Please contact your local dealer to see what their current estimate delivery times are.

 

VISIT A DEALER:

Four Wheel Campers – Pop Up Truck Camper Leader Since 1972

 

COME SEE US at an event near you!

https://fourwheelcampers.com/events/

 

We hope to be part of your adventures!

-Team Four Wheel Campers – Since 1972